WP300A is available in both direct thermal and thermal transfer, it contains a powerful 32-bit processor for fast label throughout and 4MB flash memory, 8MB SDRAM, SD card reader for Flash memory expansion, up to 4 GB for increasing storage of fonts and graphics. The printing speed can be up to 127mm/s, and with 300 meter ribbon, less frequent replacement.
When you own a WINPAL WP300A printer, you may not be able to install ribbions on WP300A printer correctly.
I have prepared the installation steps and video breakdown instructions for you. Please see the following step-by-step.
(1)Open the top cover by pressing the open button on both sides. Then lift the top cover to the maximum open angel.
(2)Insert ribbon paper core onto ribbon rewind hub.
(3) Align the notches on the left side and mount onto the spokes.
(4)Press the open button of print head.
(5) Insert the ribbon paper core onto ribbon supply hub.
(6)Align the notches on the left side and mount onto the spokes.
(7)Crossing print head, Stick the ribbon onto the ribbon rewind paper core and insert the paper core onto the rewind smoothly.
(8)Turn the ribbon rewind hub until the ribbon plastic leader is thoroughly wound and the black section of the ribbon covers the print head.
(9)Press down to close the print head, in accordance with the direction that the arrows in the picture indicate. In order to guarantee the print quality, please check and make sure the print head is closed completely.
I recommend that you study with a combination of writing and video, this will help you better install the ribbons correctly.
If you have any questions, please come to WINPAL official website for consultation. Thank you for taking the time to read this article. I hope I have helped you very well.
Post time: Jun-04-2021
